|
发表于 2005-12-19 18:14:44
|
显示全部楼层
来自 中国–河北–石家庄
回复: 我的服务器的fps这个数值是不是偏低?
Post by ikel
服务器的配置是:P4 1.4G 256M DDR WWCL v2.56_INET-WAR, AMXX v1.00, MM v1.17.3 Booster v1.70 开了CD和BLACKCD Server_fps 490左右下面是booster在server.cfg中的参数:// booster_show_connmsg -- //// 2: Large connmessage // 1: small connmessage // 0: disabled//booster_show_connmsg 1// booster_autofps -- //// Automaticly changes value of sys_ticrate to get server run at fps value defined in this cvar.// Minimum sys_ticrate that set is 100, maximum 1000.//booster_autofps 1000// booster_minsleepms --//// Minimum sleep time set to mmsystem. 1.41-1.44 used 1ms which might cause some timer problems// with Win2k.//// 1ms makes server to run at max 1000fps// 2ms -||- max 500fps// 3ms -||- max 333fps (booster default)// 4ms -||- max 250fps// 10ms -||- max 100fps (OS default)// Default value is 3ms. Value range is 1 to 10.//// !NOTE! systemwide effect! all timers will get accurency that booster sets!// !NOTE! If you run other programs that use multimedia timer tweak values that booster has set// might get overridden!//booster_minsleepms 1// booster_force_systicrate -- //// Less than 50 : Disabled// More than or equal to 50 : Forces value of sys_ticrate to value of this cvar//// !NOTE! Setting more than or equal to 50 overrides booster_autofps feature//booster_force_systicrate 10000// booster_cpu_enabled -- //// 1: Booster will monitor CPU usage and adjust timers to reduce load when necessary // 0: disabled//booster_cpu_enabled 0// booster_cpu_spikemax -- //// Number of times booster_cpu_spikelevel needs to be exceeded in order for timers to// increase and CPU load to be reduced. //booster_cpu_spikemax 3// booster_cpu_spikelevel -- //// Level which CPU utilization needs to exceed (booster_cpu_spikemax times) for timers// to increae and CPU load to be reduced.//booster_cpu_spikelevel 75// booster_cpu_mminc -- //// Amount timer will increment (WinHL-Booster will also decrease the timer every time// 5 minutes passes without booster_cpu_spikelevel being exceeded.//booster_cpu_mminc 2另外:sys_ticrate "10000"请高手帮忙看看 谢谢 好像你的服务器配置比较低 |
|