搜索
查看: 15908|回复: 18

[其他] resgen 2.0.2 的参数!

[复制链接]
发表于 2006-10-5 17:30:23 | 显示全部楼层 |阅读模式 来自 中国–湖南–郴州
哪位大侠有时间帮我看看这些参数是做什么用的。


  1.     -a [rfafile]
  2.         The contents of the rfa file will be added to the end of the res file.
  3.         This is useful when adding custom resources, like the StatsMe
  4.         sound pack. The .rfa file extension is optional.
  5.    
  6.     -b [rfafile]
  7.         Excludes generated resources listed in [rfafile] (Default exclude
  8.         .rfa's included). Useful to avoid log spam and steam http download
  9.         problems. It is    recommended to use this feature for steam servers, but
  10.         note that it causes a speed decrease generating the res files.
  11.    
  12.     -c
  13.         Displays the RESGen credits.
  14.    
  15.     -d [folder]
  16.         [folder] will be searched for bsp files. A trailing (back)slash is
  17.         optional.
  18.    
  19.     -e [modpath]
  20.         Makes RESGen verify that all resources in the res file actually exist.
  21.         Resources that can't be found will be excluded from the res file.
  22.         RESGen expects modpath to point to a valid mod directory structure.
  23.         If the modpath isn't the valve folder, RESGen will try to find the
  24.         valve folder too, so a complete resource list can be established.
  25.    
  26.     -f [map]
  27.         A res file will be generated for [map]. The .bsp file extension is
  28.         optional.
  29.    
  30.     -g
  31.         Displays content of generated .res files and reports all missing
  32.         resources. Causes slower performance.
  33.    
  34.     -h
  35.         Displays the help screen.
  36.    
  37.     -i
  38.         Displays maps found while building the map list.
  39.         Only useful with the -r and/or -d option.
  40.    
  41.     -j
  42.         Resources found while building the resource list will be displayed.
  43.         Useful with -e option.
  44.         
  45.     -k
  46.         Windows only. RESGen will not wait for the user to press a key to exit.
  47.    
  48.     -l
  49.         Turns on converting all res file entries to lowercase. RESGen converts
  50.         all res file entries to lowercase since this is the default for
  51.         Half-Life files. It has to do this because a lot of resource files in
  52.         maps don't have the proper case that matches the actual    resources.
  53.         Only use this option if you know what you are doing.
  54.    
  55.     -m
  56.         Matches the case of the res file entries to the actual case of the
  57.         files on disk. This prevents any missing resources because of wrong
  58.         case in filenames. Recommended on Linux. If this option is used, the -l
  59.         option will have no effect. Only works if used with the -e option.
  60.    
  61.     -o
  62.         If a res file already exists it will be overwritten. Removes old res
  63.         files if the new file doesn't contain any res entries and no file is
  64.         specified with the -a option.
  65.    
  66.     -p
  67.         Prevents RESGen from using the contents of any pakfile for resource
  68.         verification. Thus, any resource that is available, but in a pakfile
  69.         is excluded from the res file. This option is only useful when the
  70.         -e option is also used. Please note that if a map comes with it's own
  71.         pakfile, using this option will generate a res file that is
  72.         incomplete.
  73.    
  74.     -r [folder]
  75.         [folder] and it's subfolders will be searched for bsp files. A trailing
  76.         (back)slash is optional.
  77.    
  78.     -s
  79.         RESGen will display it's status line. This might considerably slow
  80.         down res file generation, especially on smaller maps.
  81.    
  82.     -t
  83.         Linux only. RESGen will ignore symbolic links when searching folders
  84.         for .bsp files. Please note that this does NOT affect resource
  85.         searching. Useful with -d or -r options.
  86.    
  87.     -u
  88.         Parses relevant resource files to make sure they are actually used
  89.         (such as WAD files) or to check if they have dependencies (such as
  90.         MDL files with seperate textures). Only works with -e option.
  91.    
  92.     -v
  93.         Makes RESGen only give minimal output.
  94.         It's recommended you use this if you want to create res files as fast
  95.         as possible. RESGen will still report any error.
  96.    
  97.     -w
  98.         Displays the warranty for RESGen.
  99.    
  100.     -x [map]
  101.         Exclude this map from res file generation. Only works on maps found
  102.         with -d or -r options. The .bsp file extension is optional.
复制代码


下面是resgen 2.0.2

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注个册吧

×
 楼主| 发表于 2006-10-5 17:34:43 | 显示全部楼层 来自 中国–湖南–郴州

回复: resgen 2.0.2 的参数!

自己慢慢翻译了一些:

-a
把rfa里面的文字加入到res文件的末尾。

-b
生成的res文件中排除rfa文件里的内容。

-c
查看ResGen制作群。

-d [路径]
搜索定义路径下的bsp文件。

-e [modpath]
排除指定目录里不存在的文件。
回复

使用道具 举报

发表于 2009-7-22 08:27:07 | 显示全部楼层 来自 中国–福建–莆田
thank you !!!!!
回复

使用道具 举报

发表于 2010-3-3 04:19:37 | 显示全部楼层 来自 中国–云南–昆明–五华区
谢了  收下。。。。
回复

使用道具 举报

发表于 2010-4-23 19:25:28 | 显示全部楼层 来自 中国–山东–枣庄
感谢分享成果
回复

使用道具 举报

发表于 2011-10-31 18:50:24 | 显示全部楼层 来自 中国–甘肃–兰州
我为什么不能下载啊~:dizzy:
回复

使用道具 举报

发表于 2012-2-4 11:12:52 | 显示全部楼层 来自 中国–湖北–随州
很好,谢谢你啊,辛苦了~~
回复

使用道具 举报

发表于 2012-2-6 11:52:57 | 显示全部楼层 来自 中国–湖北–随州
很好,谢谢你啊,辛苦了~~
回复

使用道具 举报

发表于 2012-2-20 16:38:09 | 显示全部楼层 来自 中国–湖南–长沙
今天,在单位食堂打开水。不小心水溅在了手上,背后一位MM拉着我的手关切的问:“手没烫伤吧?”尽管很疼但为了显示男子汉气概我硬是咬着牙说“没事,没事!”并装作若无其事的样子。MM突然回过头和后面排队的人们说“都回去吧,今天的水又没烧开
回复

使用道具 举报

发表于 2012-2-24 15:49:13 | 显示全部楼层 来自 中国–广东–广州
提示: 作者被禁止或删除 内容自动屏蔽
回复

使用道具 举报

游客
回复
您需要登录后才可以回帖 登录 | 注个册吧

快速回复 返回顶部 返回列表