[求助] 架设LAN里的HLTV服务器出的问题

becking

限于条件，偶今天试了下在自己的LAN里建一个HLTV服务器，按照英文README里把快捷方式的端口和HLTV端口都填好了，而且HLTV。CFG也设置无误（HLTV快捷方式如下：D:\反恐精英1.5\hltv.exe +10.0.13.61:27015 -port 27021 HLDS快捷方式如下：D:\反恐精英1.5\hlds.exe -game cstrike 10.0.13.61-port 27015 +maxplayers 18 +map de_dust2 -nomaster +sv_lan 1）我的LAN IP是：10.0.13.61，我开始以为是自己建服务器不能用HLTV直接看，后来在LAN里另一台主机上建立游戏，把快捷方式的IP改了，然后点击HLTV快捷方式，可是窗口提示：ERROR！ SYSTEM：dispatchcommand：command“10.0.13.61” NOT REGISTERED！
当然了我用D版的CS，难道非要装正版的才能做？？？不是吧？
我确定快捷方式里的IP和端口都没错（我用LAN里的IP），是什么问题了？望各位有谁熟悉HLTV的指点一下~~~谢谢~~~

becking

这是我的HLTV。CFG大家看下（我想应该没问题）
-------------------------------------------------------------------------
// HLTV Proxy configuration file

// HLTV proxy executes this file on start up
// This file should only be edited if you want to broadcast a game

// set HLTV proxy name as shown in score board
name "606 Xabre HLTV Proxy"

// hostname "606 Xabre's CS HLTV Proxy"

// set offline info text clients will see as reject reason if HLTV isn't broadcasting yet
offlinetext "Sorry, game is delayed. Please try again later."

// delays broadcasting for 30 seconds
delay 30.0

// auto director addes 1/2 slowmotion with a probability of 0.2 for important events
slowmotion 0.5 0.2

// keep multicast disabled until you're definitely sure
// that your LAN or ISP supports multicast
multicast 0

// allow 3.5 KByte/sec as client rate. This is good a value
// for internet broadcasts. On LAN you may set this value to 10000
maxclientrate 10000

// log HLTV console in proxy.log
// logfile 1

// local chatting for HLTV spectators enabled
chatmode 1

// if game server is paswword protected, enable this line
// serverpassword SecretServerPassword

// proxy's adim password for rcon, commentator etc.
adminpassword "squall"

// allow joingame for HLTV spectators
allowjoingame 0

// show message for 5 seconds each 60 seconds in center of X axis (-1) and
// above help text bar (0.85). Color given as hexadecimal RGBA .
loopcmd 1 120 localmsg "You're watching HLTV. Visit www.valvesoftware.com" 5 -1 0.9 FFA000FF


// hltv.wad contains the HLTV banner and my be different on each proxy
// banner format should be 240x48, 256 colors (same like player logo in pldecal.wad)
// decalfile "hltv.wad"

// hltv.tga will be shown instead of the default HLTV logo in spectator GUI
// bannerfile "hltv.tga"

// these commands will be executed on connecting spectator client and may be used
// to adjust settings for HLTV (for example voice parameters)
signoncommands "voice_scale 2; voice_overdrive 16; volume 0.5; echo Voice adjusted for HLTV"

// show message for 5 seconds each 60 seconds in center of X axis (-1) and
// above help text bar (0.85). Color given as hexadecimal RGBA .
//loopcmd 1 60（每隔60秒） localmsg "You're watching Xabre's CSTV. Visit http : / / Beckonline.yeah.net"（显示的信息内容） 5（显示5秒） -1（X轴-1表示中间） -1（Y轴-1表示中间） 7700FFFF（RGBA颜色值：红、绿、蓝、透明度 16进制2位表示）
loopcmd 1 60 localmsg "You're watching Xabre's HLTV. Visit http://beckonline.yeah.net"/ 5 -1 -1 FF0000FF


好象除了快捷方式和这个CFG应该没有要设置的东西了吧？？？
望强人指点~~谢谢

小凡

+10.0.13.61:27015
改为：
+connect 10.0.13.61:27015

becking

原来如此，谢谢