[求助]服务器跳PIN问题
我看过论坛好多贴子，也参考了好多高手的意见。把server.cfg设定如下。sv_lan 0sv_region 4
sys_ticrate 1000
sv_password ""
rcon_password "*********"
allow_spectators 1
decalfrequency 60
edgefriction 2
host_framerate 0
pausable 1
mp_autocrosshair 0
mp_autokick 1
mp_autoteambalance 1
mp_buytime 0.25
mp_c4timer 35
mp_chattime 5
mp_fadetoblack 0
mp_falldamage 1
mp_flashlight 1
mp_footsteps 1
mp_forcechasecam 2
mp_forcecamera 0
mp_forcecam 2
mp_fraglimit 0
mp_freezetime 6
mp_friendlyfire 0
mp_friendly_grenade_damage 1
mp_hostagepenalty 0
mp_logdetail 0
mp_logfile 1
mp_logmessages 1
mp_limitteams 1
mp_maxround 0
mp_roundtime 1.75
mp_startmoney 800
mp_timelimit 35
mp_tkpunish 0
mp_winlimit 0
sv_maxrate 25000
sv_stepsize 18
sv_stopspeed 75
sv_unlag 1
sv_maxunlag 0.5
sv_unlagsamples 1
sv_unlagpush 0
sv_maxupdaterate 30
sv_airaccelerate 10
sv_allowdownload 0
sv_send_logos 0
sv_send_resources 1
sv_allowupload 0
sv_cheats 0
sv_clienttrace 1
sv_clipmode 0
sv_gravity 800
sv_maxspeed 320
sv_voiceenable 1
sv_restartround 0
sv_restart 0
sv_alltalk 0
sv_voicequality 5
sv_aim 0
sv_airmove 1
sv_spectatormaxspeed 500
log on
booster_show_connmsg 0
// booster_autofps x (x = 0 to 1000, 0 = no target FPS)
// Automatically changes value of sys_ticrate to achieve and maintain the desired server FPS (if possible).
// It is not recommended to target FPS greater than 200 or so.
// Note that autofps adjusts sys_ticrate, which makes it incompatible with any booster_lite_mode other
// than 3. Setting booster_autofps will force booster_lite_mode to 3.
booster_autofps 300
// booster_minsleepms x (x = 1 to 10, 10 = no change to multimedia timer)
// This adjusts the multimedia system timer to trick HLDS into sleeping for less time. Note that
// the lower the value set, the higher the CPU consumption will be for HLDS. Values lower than 3
// are not recommended, as they can cause massive CPU consumption and/or system instability.
booster_minsleepms 3
// booster_force_systicrate x (x = 0 to 10000, 0 = let Booster2 manage the value itself (no force))
// Booster2 will force this sys_ticrate value. Note that using this option will set booster_autofps to 0
// and booster_lite_mode to 3, as these methods rely on a sys_ticrate value untouched by user settings.
// You should avoid directly setting sys_ticrate in your server.cfg, as manually adjusted values can
// cause problems with various parts of Booster2.
booster_force_systicrate 0
// booster_cpu_enabled x (0 = off, 1 = on, 2 = report CPU only - don't actively manage CPU)
// Booster2 can monitor CPU usage and adjust the multimedia timer to reduce load when necessary
booster_cpu_enabled 0
// booster_lite_mode x
// Controls how the Booster-Lite approach is implemented:
// 0 - HLDS sleeps 10ms if no network packets are received. If HLDS
// receives a packet, it stops sleeping. (this mode has been added
// to provide backward compatibility with how BL v1.00 worked).
// 1 - HLDS attempts to sleep 10ms. If a packet is received,
// HLDS stops sleeping. Otherwise it attempts to sleep another 10ms.
// 2 - HLDS attempts to sleep 50ms. If a packet is received, it stops sleeping.
// 3 - HLDS will sleep the standard amount (this value turns this feature off).
booster_lite_mode 3
// booster_lite_extra_sleep_frequency x
// Forces HLDS server to sleep x milliseconds even if a packet is received.
// This setting helps to lower CPU usage.
booster_lite_extra_sleep_frequency 0
exec listip.cfg
exec banned.cfg
cdrequired 1
服务器的PIN在少人的时候却是非常的好。但服务器一达到15人以上，游戏画面下边有关FPS的那一边绿线就开始出现波动。没有到15人的时候是一条非常直的直线，到了15人以后出现锯齿，有时还会出现黄点。请问有办法可以改良一下吗？
我的服务器配置是：Intel(R) Xeon(TM) CPU 2.40GHz
2.39GHz, 1.00GB
Windows 版本 5.2 Build 3790 (Service Pack 1)
操作系统 Microsoft Windows 2003 (Service Pack 1)
---计算机系统
中央处理器 Intel Xeon(TM) Northwood Processor(0.13μm)
BIOS PTLTD - 6040000 SE7500CW2 Server BIOS - Version 1.23 PhoenixBIOS 4.0 Release 6.0
主板 Intel Corporation SE7500CW2 Board
内存 1047484 KB
主硬盘 Maxtor 6Y080L0
显示卡 RAGE XL PCI Family (Microsoft Corporation)
显示器 默认监视器
音频设备 无
网络适配器 Intel 8255x-based PCI Ethernet Adapter (10/100)
回复: [求助]服务器跳PIN问题
Windows 版本 5.2 Build 3790 (Service Pack 1)这个版本是什么样的？
回复: [求助]服务器跳PIN问题
点通的几个版本都用过了。HLDS.3382.V28DT-CLUB用来做比赛服 HLDS2834DT-CLUB用来做混战服。两个服都是加载AMXX1.6+MetaMod v1.19p28+booster V2.4+CD V3.3.1比赛服10人比赛的时候一开枪就会感觉到会有一点点停顿感。
回复: [求助]服务器跳PIN问题
你用AMXX1.0+MetaMod v1.18+booster V1.7+CD V3.3.1这个组合试试，也许会好点，这是经验之谈！回复: [求助]服务器跳PIN问题
操作系统是? 有没有运行其它占用CPU高的程序请检查一下CPU占用情况.也有可能是网络问题哦！
回复: [求助]服务器跳PIN问题
Post by 小白操作系统是? 有没有运行其它占用CPU高的程序
请检查一下CPU占用情况. 也有可能是网络问题哦！
操作系统是：Microsoft Windows 2003 (Service Pack 1)
CPU因为是双CPU 占用才是7%以下。整个服务器都也只是开了一个CS1.6的服务器和一个公安要求装的上网网址记录器~理论上，线路不是太大问题。
路由是：艾泰HiPER2190NB 2
软件路由和硬路由都试过，问题还是一样。交换机什么的，都可说是最好的了~
问题还是一个样~
回复: [求助]服务器跳PIN问题
Post by xiaolysh这个版本是什么样的？
这个是WIN2003SP1
回复: [求助]服务器跳PIN问题
首先我建议你`尝试在内网内`加多一些人来帮你测试服务器，不要让外网的进来，试试`是否路由导致的`。回复: [求助]服务器跳PIN问题
应该说不关路由的事的。我调过服务器参数之后。PIN是不跳了，但开枪扫射的时候却有明显的停顿感。什么参数可以改良？回复: [求助]服务器跳PIN问题
换成win2000 shishi
页:
[1]
2